Apple 9L0-010 Real Exam, Discount Apple 9L0-010 Exam Materials Online Shop

Flydumps provides guarantee of Apple 9L0-010 exam because Flydumps is an authenticated IT certifications site and the high class of the products are developed due to extensive hiring of the experts staff.Apple 9L0-010 study guide is updated with regular basis and the answers are rechecked of every exam.What’s more,you can download the free demos in PDF file,it would be a great help for your exam.All the dumps are updated and cover every aspect of the examination

QUESTION 31
Which of the following is NOT a valid Bluetooth troubleshooting tip for Macs?
A. Check for signal interference.
B. Make sure Bluetooth is turned on.
C. Update Bluetooth software on the Mac.
D. Verify Bluetooth peripheral hardware batteries are charged.
E. Make sure the Bluetooth peripheral is at least 20 meters away from the Mac.

Correct Answer: E
QUESTION 32
You are troubleshooting an iMac (Early 2008) that does not power on. You notice that all diagnostic LEDs remain off when a known-good power cord is connected to the iMac and to a known-good power outlet. What is most likely the cause of these symptoms?
A. Faulty power supply
B. Faulty optical drive
C. Faulty LCD panel
D. Faulty video card
Correct Answer: A
QUESTION 33
Examine the exhibit.

What is this message?
A. Kernel Panic
B. Software Update
C. Firmware Update
D. Power-On Self-Test

Correct Answer: A
QUESTION 34
What is the indication that a Mac has completed a successful power-on self test (POST)?
A. Startup Chime.
B. A series of beeps.
C. The Login Window starts.
D. The Desktop, Dock, and menu bar load.

Correct Answer: A
QUESTION 35
You can use a higher wattage power adapter with an Apple portable computer, but you cannot use one with less wattage without potential operating issues.
A. True
B. False
Correct Answer: A
QUESTION 36
What is the proper way to calibrate a removable main battery in a MacBook (13-inch, Mid 2009)?
A. Charge the battery while running the Battery Calibration Utility.
B. The battery is calibrated out of the box; no further steps are needed.
C. Charge the battery overnight. Make sure battery status indicates 100% before disconnecting AC adapter.
D. Charge the battery fully. Wait 2 hours. Run the MacBook on battery until it goes to sleep. Wait 5 hours. Charge it fully again.
E. Charge the battery halfway. Wait 2 hours. Finish charging the battery. Run the MacBook on battery until it goes to sleep. Charge it fullyagain.

Correct Answer: D
QUESTION 37
Which of the following is NOT a valid power saving technique in recent Mac computers?
A. Disconnect all peripherals.
B. Activate automatic display sleep.
C. Activate automatic hard disk sleep.
D. Use wireless networks instead of wired networks.
E. Set up locations optimized for different environments.

Correct Answer: D
QUESTION 38
Which of the following most accurately describes what happens during Safe Sleep activation in Mac portables?
A. The contents of RAM are written to NVRAM before sleep.
B. The contents of the hard disk are encrypted before sleep.
C. The contents of RAM are written to hard disk before sleep.
D. The contents of the hard disk are read into RAM before sleep.

Correct Answer: C
QUESTION 39
MacBook Air comes with a _____ MagSafe power adapter.
A. 45 Watt
B. 60 Watt
C. 65 Watt
D. 80 Watt
E. 85 Watt

Correct Answer: A
QUESTION 40
A MacBook Pro (17-inch Mid-2010) powers on with no image on the built-in display. You connect an external display and restart the MacBook Pro, yet you still see no image on either display. Which of the following is most likely the cause of this symptom?
A. Dead battery
B. Not enough RAM
C. Faulty optical drive
D. RAM not completely seated

Correct Answer: D
QUESTION 41
Which THREE of the following components should you be very careful with, when working inside an Apple portable? SELECT THREE
A. Plastic tab
B. Small screw
C. Ribbon cable
D. Deflection coil
E. Anode aperture
F. Flyback transformer

Correct Answer: ABC QUESTION 42
Which of the following would be the most appropriate question to ask FIRST, when gathering information from customers about a problem with their Apple product?
A. What is the issue?
B. What operating system are you using?
C. Did you turn off the computer improperly?
D. What steps have you taken to resolve the problem yourself?

Correct Answer: A QUESTION 43
A customer claims that her Mac cannot connect to her AirPort Express network at home. Which of the following would be the BEST question to ask her FIRST?
A. Can any other computer successfully join her network?
B. Does your ISP support wireless access to the Internet?
C. What type of wireless card is installed in your Mac?
D. Have you upgraded to Mac OS X v10.7.3?

Correct Answer: A QUESTION 44
When practicing component isolation, which ONE of the following components would NOT be a part of a minimal system configuration for a MacBook 13-inch (Mid 2010)?
A. RAM
B. Logic board
C. Optical drive
D. Power adapter

Correct Answer: C QUESTION 45
Which TWO of the following are clues that may indicate a ‘no video’ condition? SELECT TWO
A. You do not hear a startup chime.
B. You may hear fan or drive noise.
C. You cannot connect to the Internet.
D. The power button or power indicator lights up.
E. The cursor is frozen and the system is unresponsive.

Correct Answer: BD QUESTION 46
Which of the following is ALMOST CERTAINLY a hardware-related problem?
A. No video at startup
B. Error beep at startup
C. Distorted video at startup
D. Blinking question mark at startup

Correct Answer: B QUESTION 47
Which of the following is ALMOST CERTAINLY a software-related problem?
A. No video on display
B. Single beep at startup
C. No Internet connectivity
D. iPhoto quits when launched

Correct Answer: D
QUESTION 48
A customer states that he cannot open a Keynote file. What is the most effective question to ask him FIRST?
A. Can you open any files?
B. Can you open other Keynote files?
C. Is your Mac connected to a network?
D. What version of Keynote are you using?

Correct Answer: B
QUESTION 49
To isolate a video problem as hardware or software on a Mac, which of the following steps should you try FIRST?
A. Replace the built-in display.
B. Reinstall the appropriate Mac OS.
C. Verify the hard disk with Disk First Aid.
D. Start up from a known-good startup volume.

Correct Answer: D
QUESTION 50
Verifying that a computer functions properly after you repair it ensures that _____. SELECT THREE
A. third-party software is working
B. the original issue has been resolved
C. the computer falls under service warranty
D. the computer will continue to function after the repair
E. no new problems have been introduced during the repair
Correct Answer: BDE
QUESTION 51
Which THREE of the following are clues that may indicate a ‘no power’ condition? SELECT THREE
A. You do not hear a startup chime.
B. You cannot connect to the Internet.
C. You do not hear any fan or drive noise.
D. The cursor is frozen and the system is unresponsive.
E. The power button or power indicator does not light up at all.
Correct Answer: ACE
QUESTION 52
What step is required before upgrading the RAM in a Mac Pro (Early 2009)?
A. Remove the processor tray.
B. Remove the hard drive carriers.
C. Remove the front inlet fan assembly.
D. Remove the Optical Drive and Carrier.

Correct Answer: A QUESTION 53
The Mac Pro (Early 2009) has SMC functionality split between a primary SMC on the backplane board, and a secondary SMC on the processor board. What service issue should a technician be aware of when servicing the Mac Pro (Early 2009)?
A. SMC firmware must always match on both boards.
B. Three internal buttons must be pressed in order to reset both SMCs.
C. It is required to remove the memory riser card in order to reset the SMC.
D. Processor trays are interchangeable between similar Mac Pro (Early 2009) units.

Correct Answer: A QUESTION 54
A computer service technician says “I don’t use ESD precautions and have never had a problem.” What (if anything) is wrong with this statement?
A. Nothing is wrong with this statement.
B. ESD damage may not appear immediately.
C. ESD happens only to inexperienced technicians.
D. ESD damage is really not as bad as everyone thinks.

Correct Answer: B QUESTION 55
You want to follow ESD prevention rules, but your work area is too small for you to be tethered with a wired wrist strap. What is one acceptable alternative solution to this issue?
A. Use a wireless wrist strap.
B. Use a grounded ESD heel strap.
C. Do not practice ESD prevention.
D. Work on the floor instead of a table.

Correct Answer: B QUESTION 56
When you work at a customer site, you do not need to take any precautions to avoid ESD damage.
A. True
B. False

Correct Answer: B QUESTION 57
ESD causes damage to circuits by ________.
A. slowing the circuit down
B. blasting a hole in the circuit
C. cooling the circuit too quickly
D. increasing the circuit’s clock speed Correct Answer: B
QUESTION 58
You are preparing to service a MacBook. To reduce the risk of damage from ESD, you clear the area of plastic, vinyl, or foamed polystyrene, and have static-shielding storage bags available for ESD-sensitive components. While you are working you should also remember to ________________ and _______________. SELECT TWO
A. ground yourself and the equipment you are working on
B. always place ESD-sensitive components on metal surfaces
C. discharge the display to protect the other ESD-sensitive components
D. handle any ESD-sensitive components by the connectors, rather than by the edges
E. ask other technicians to avoid touching you when you are working on ESD-sensitive components

Correct Answer: AE
QUESTION 59
You are about to replace a MacBook Air (13-inch, Late 2010) logic board. Which of the following is the most important step you should take immediately after removing the bottom case?
A. Remove the thermal module.
B. Install the battery cover.
C. Remove the hard drive.
D. Remove the battery.

Correct Answer: B
QUESTION 60
Which of the following scenarios would be most appropriate to use Apple Service Diagnostic?
A. You want to check a Mac for accidental damage.
B. You want to verify product functionality after a repair.
C. Your customer wants to run diagnostics on his Mac Pro.
D. You need to verify that all installed applications have been updated.

Correct Answer: B
QUESTION 61
A customer asks if there is a diagnostic that he can use to help troubleshoot a hardware problem with his MacBook Pro. Which of the following solutions should you suggest?
A. Apple Service Diagnostic
B. Apple Hardware Test
C. Terminal
D. Console
Correct Answer: B
QUESTION 62
Apple Service Toolkit uses ____ to check Macs with Mac Resource Inspector and other diagnostic utilities.
A. NetBoot
B. Open Firmware
C. Target Disk Mode
D. Apple Remote Desktop
Correct Answer: A
QUESTION 63
Examine the exhibit.

Why is it necessary to use this Service Fixture when replacing the left fan or heat sink in a MacBook Pro (15-inch, Mid 2009)?
A. This tool is used to avoid flexing the logic board.
B. This tool is used to avoid ESD damage to the logic board.
C. It is impossible to remove these components without this tool.
D. This tool is used to properly align the processor with its socket.

Correct Answer: A
QUESTION 64
You are about to begin disassembly of an iMac (27-inch, Mid 2010) to replace the LCD display. Which TWO of the following tools are required to do this? SELECT TWO
A. Multimeter
B. Suction cups
C. Service stand
D. Anti-static, lint-free gloves
E. Torx T-15 driver with 5 inch shaft
Correct Answer: BD
QUESTION 65
Examine the exhibit.

This specialized tool is required for the removal of which component from the Mac mini (Mid 2010)?
A. Fan
B. Memory
C. Bottom Cover
D. Antenna Plate
E. Logic Board Assembly

Correct Answer: E QUESTION 66

We provide thoroughly reviewed Apple 9L0-010 using the training resources which are the best for Apple 9L0-010,and to get certified by Microsoft Windows Store apps.It is a best choice to accelerate your career as a professional in the Information Technology industry. Now we add the latest Apple 9L0-010 content and to print and share content.