3Com 3M0-212 Flydumps,Prompt Updates 3Com 3M0-212 Real Questions Answers Are The Best Materials

Flydumps is the best place for preparing IT Certifications as we are providing latest and guaranteed questions for all certifications.We offer you the ultimate preparation resource of 3Com 3M0-212 exam question. Wondering what could be this effective? It is our training material which serves as a guide to achieving your dream as a certified professional.

QUESTION 35
What is MINIMUM REQUIREMENT TO SUPPORT THE Resilient IP address feature of the SuperStake 3 Switch 4400?
A. Nothing – it is supported by every switch
B. At least two switches must be staked together
C. All the switches in a stack must have their own IP address
D. At least two switches in a stack, and both switches must have an IP address

Correct Answer: D
QUESTION 36
Which three traffic-prioritization classification are supported by the Super Stack 3 Switch 4400?
A. IP address
B. Physical port number
C. Resource Reservation Protocol
D. Common Open Policy Service Protocol
E. IETF Differentiated Services Code Point

Correct Answer: ABE
QUESTION 37
Which two rules must be followed when configuring Link Aggregation groups on the Switch 7700 1000BASE-T and 1000BASE-X modules? (Choose two)
A. The Link Aggregation group can start on any port
B. All the ports in a Link Aggregation group must be consecutive
C. A single Link Aggregation group can span multiple interface Modules
D. A maximum of eight ports can belong to a single Link Aggregation group
E. A maximum of twelve ports can belong to single Link Aggregation group

Correct Answer: AB
QUESTION 38
What is the maximum number of Link Aggregation load-balancing group supported on the Switch 7700?
A. 4 groups
B. 13 groups
C. 24 groups
D. 64 groups
E. 128 groups

Correct Answer: D
QUESTION 39
Which three are functions of the Access Control List capabilities of the Switch 7700? (Choose three)
A. Filter routing updates
B. Support Embadded Firewall
C. Control management logins
D. Filter data from information in Layer 2-4 IP header
E. Integrate with RAIDUS for maximum security protection

Correct Answer: ACD
QUESTION 40
Which two operations does the Switch 7700 use to prevent network loops on an Ethernet network? (Choose two)
A. The switch uses Spanning Tree Protocol (STP) to eliminate loops on the network
B. The network administrator must configure switch-to-switch ports to eliminate loops on the network
C. The switch uses Virtual Router Redundancy Protocol (VRRP) to eliminate loops on the network
D. The switch uses Address Resolution Protocol (ARP) to determine the network topology and eliminate loops
E. The switch uses Multiple Spanning Tree Protocol (MSTP) to eliminate loops on the network
F. The switch automatically learns address of other devices by listening to the network to determine the network topology

Correct Answer: AE
QUESTION 41
Which three are Multilayer Giabit Software features of the Switch 40×0 Family? (Choose three)
A. Supports RIP, RIP2 and ODPF
B. Protocol-based VLAN support
C. Link Aggregation and Resilient Links support
D. IP unicast routing with up to 256 router interfaces
E. Routed Access Control Lists based on application filtering
F. Multicast filtering with internet Group Multicast Protocol (IGMP) snooping and IGMP querier

Correct Answer: ACF
QUESTION 42
Which three are Smart IP Switch 40×0 family features? (Choose three)
A. Switch can function as a DHCP or BootP server
B. Supports both manual and automatic IP configuration
C. Uses SNMP trap to verify the availability of IP address pool.
D. Can select a random IP address from default assress range
E. Can receive an IP address from either a DHCP or BootP server
F. Network manager must release any automatically assigned address before the switch can be manually configured

Correct Answer: BDE
QUESTION 43
Which component of XRN technology is defined as: “An advanced routing implementation that allows multiple interconnected switches in an XRN solution to behave as a single active routing entity”?
A. XRN Interconnect
B. XRN Distributed Fabric
C. Distributed Link Aggregation (DLA)
D. Distributed Resilient Routing (DDR)
E. Distributed Device Management (DDM)
Correct Answer: D
QUESTION 44
Which two are valid XRN Fabric configurations? (Choose two)
A. Switch 4050 and Switch 4070
B. Switch 4060 and SuperStack 3 Switch 4950
C. Switch 4007 and SuperStack 3 Switch 4400
D. SuperStack 3 Switch 4400 and SuperStack 3 Switch 4900
E. Switch 4050 and Switch 4060,Swicth 4070 and SuperStack 3 Switch 4900

Correct Answer: AB
QUESTION 45
Which two 3Com switch families can currently be used to create an XRN Distributed Fabric (DF)? (Choose two)
A. 3Com Swicth 40×0 family
B. 3Com Swicth 4005 family
C. 3Com Swicth 4007 family
D. SuperStack 3 Swicth 4400 family
E. SuperStack 3 Swicth 4900 family

Correct Answer: AE
QUESTION 46
Which two components are required to create a geographically distributed XRN solution (excluding the appropriate 3Com switches)?(Choose two)
A. 4-port GBIC module
B. 3Com Network Supervisor
C. XRN Fabric Interconnect Modules
D. High-Bandwidth Interconnect Cable
E. Gigabit Multilayer Switching Software V4.X

Correct Answer: AE
QUESTION 47
What is minimum requirement to support the Resilient IP address feature of the SuperStack 3 Switch 4400?
A. Nothing – it is support by every switch
B. At least two switches must be stacked together
C. All the switches in a stack must have their own IP address
D. At least two switches in a stack, and both switches must have an IP address

Correct Answer: D
QUESTION 48
What is the procedure for upgrading a SuperStack 3 Switch 4400 SE to the enhanced switch feature set?
A. Enter the software upgrade code obtained from 3Com and reboot the switch
B. Copy the 3Com upgrade file to TFTP server on the same subnet as the switch, start the TFTP server and configure the switch, reboot the switch when the Power LED stops flashing
C. Copy the 3Com upgrade file to a TFTP server on the same network as the switch, start the TFTP server and configure the switch reboot the switch when the Power LED stops flashing
D. Purchase and obtain activation key for the Switch 4400 Enhanced Software Upgrade from 3Com using Command Line Interface (CLI) entry “system license add” enter activation key confirm.

Correct Answer: D
QUESTION 49
Which three Physical Layer components should you check when either the Switch 7700 or Switch 8800 is having a connection problem? (Choose three)
A. Link LEDs
B. Switch ARP tables
C. Switch VLAN assignments
D. MAC address for the link
E. RX error statistics for link
F. Link Speed, duplex mode and flow control
Correct Answer: AEF QUESTION 50
Which three may be the cause of a Switch 7700 Network Layer 3 problem? (Choose three)
A. The switch trunk ports are not properly configured
B. The RIP versions are not the same between switches
C. The switches is not sending and receiving rout ipdates
D. Spanning Tree Protocol (STP) is disabled on the switch
E. The MAC address table “aging parameter” is set too high
F. Virtual Router Redundancy Protocol (VRRP) is not properly configured on the switch

Correct Answer: BCF
3Com 3M0-212 only advanced and equipped with much more features,it is also not internet dependent,once installed.It enables you to see Interconnecting Cisco Networking Devices in a simulated 3Com 3M0-212 exam environment.Working with 3Com 3M0-212 Interactive Testing Engine is like passing an actual 3Com 3M0-212 exam.